BigRep STUDIO 2 Safety
53
Never attempt to bypass or deactivate fuses!
Keep moisture away from live parts!
Electrostatic charge hazard. It is not allowed to operate the device in explosive
environments!
In case of water damage disconnect the device from its power source!
Switch device o completely and disconnect from power source before conduct-
ing any work on the electrical system as well as before any maintenance and re-
pair work.
Any work on electrical components may only be carried out by qualified special-
ists. This applies especially for any work on components inside the control cabinet!
It can be that electrical cables cause the machine to be electrified. Perform visual
inspection before use.
Chemical Hazards
Please be sure to always refer to the specifications provided by the manufacturer
or retailer for the individual types of filament material.
Make sure that the working environment is su iciently ventilated during the print-
ing process.
General Safety instructions
Always store sharp tools in a safe place.
Danger from Rotating Parts
CAUTION – Toxic Fumes and Substances
Unauthorized filaments can produce vapors with harmful health e ects. Ex-
clusive use of printing materials approved in the operating instructions.
Never clean the print bed with solvent-based detergents. They may produce
toxic fumes when heated.
WARNING – Catching and Winding Hazard
Rotating machine parts can cause injuries from entanglement. Hair and
clothing can get caught and wound up in the spindles. Wear tight-fitting
work clothes. Protect long hair with head wear. Do not wear gloves. Do not
wear jewelry.
Contaminant intake: Do not eat at the working place. Do not eat, drink, or
smoke at the machine working space. Wash hands before breaks and a er
working with the machine.
To Next Page
Loading...
