BIGTREETECH ADXL345 V2.0 User Manual

BIGTREETECH ADXL345 V2.0 User Manual
10
2. Upload to the Configuration Files.
3. In printer.cfg, add:
[include sample-bigtreetech-adxl345-v2.0.cfg]
4. Set the correct ID number for your board.(USB serial or canbus)
5. Configure the module's functions according to the instructions in the link
below:
https://www.klipper3d.org/Config_Reference.html#adxl345
The axes_map parameter needs to be set according to the direction of
the module installation and the movement direction of the printer. The first
parameter represents the direction of the accelerometer module
corresponding to the axis when the printer's X-axis moves in the positive
direction (the silk screen on the module shows the direction of each axis
of the module), and the second parameter represents the direction of the
accelerometer when the Y-axis moves in the positive direction.

BIGTREETECH ADXL345 V2.0 Specifications

General

Brand	BIGTREETECH
Model	ADXL345 V2.0
Category	Computer Hardware
Language	English