BIGTREETECH ADXL345 V2.0 User Manual

BIGTREETECH ADXL345 V2.0 User Manual
4
Product Profile
BIGTREETECH ADXL345 V2.0 is a module for printer resonance compensation.
It can communicate through USB, greatly simplifying wiring.
Feature Highlights
 The board has a reserved BOOT button for easy firmware updates.
 Reserved solder points enable users to customize wiring easily.
 The USB port has an added ESD protection chip to prevent the MCU from
being damaged by static electricity through the USB.
Specifications
Dimensions
33.25 x 15.5mm
Installation Dimensions
See BIGTREETECH ADXL345 V2.0-SIZE.pdf for
details.
Microprocessor
RP2040 Dual ARM Cortex-M0+ @ 133MHz
Input Voltage
DC 5V
Logic Voltage
DC 3.3V
Communication with PC
USB2.0
Sensor
ADXL345
Sensor Communication
4Line SPI
Resolution
Up to 3.9mg/LSB.
Output Data Rate
0.1-3200Hz
Sensor Operating
Temperature Range
-40℃ to +85℃
Firmware Support
This product currently only supports Klipper firmware.

BIGTREETECH ADXL345 V2.0 Specifications

General

Brand	BIGTREETECH
Model	ADXL345 V2.0
Category	Computer Hardware
Language	English