EasyManua.ls Logo

BIGTREETECH M4P - 3.7 Stepper Driver Voltage Selection

BIGTREETECH M4P
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
13 / 34
3.4.5 Stepper Driver Voltage Selection
The power supply of each driver can be set by the jumper. When the jumper is inserted
into the left side, the independent MOTOR POWER port is used for driver power, and
the supported voltage up to 56V. When the jumper is inserted into the right side, the
main POWER port is used for driver power, and the 12/24v voltage is supported.
3.4.5.1 Driver independent power supply
The jumper is inserted into the left side and powered by the MOTOR POWER port. the
supported voltage up to 56V.
3.4.5.2 Main power supply
The jumper is inserted into the right side and powered by the main POWER port. the
12/24v voltage is supported.

Table of Contents

Related product manuals