Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
33 / 34
6.4 Configure Klipper
1. Enter your device IP address into your browser to open the webUI，find the
reference config for motherboard in the directory shown below，if there is no such
config available, update your klipper source code to the newest version or
download from github: https://github.com/bigtreetech/Manta-M4P
2. Upload your finished config file into Configuration Files, and rename to “printer.cfg”
3. Insert the correct motherboad ID
Refer to https://www.klipper3d.org/Overview.html for detailed configuration guide
according to your machine type.
To Next Page
Loading...
Need help?
General
