Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
29 / 34
6. Configure the motherboard
6.1 ssh connect to device
1. Install the ssh application Mobaxterm: https://mobaxterm.mobatek.net/download-
home-edition.html
2. Insert Micro SD card to M4P, wait for system to load after power on, aprox. 1-2min
3. The device will automatically be assigned a IP address after successfully
connected to the network
4. Find the device IP address in your router page
5. Or use the https://angryip.org/ tool，scan all IP address in the current network
organize by names, find the IP named Fluidd, Mailsail (CM4) or Hurakan (CB1)
like shown below
To Next Page
Loading...
