深圳市必趣科技有限公司
BIGTREETECH
16 / 19
Configure the Motherboard
SSH Connect to Device
1. Install the SSH application Mobaxterm：https://mobaxterm.mobatek.net/download-
home-edition.html
2. Insert the microSD card into the motherboard, and wait for the system to load after
powering on, approx. 1-2min.
3. The device will automatically be assigned an IP address after successfully connecting
to the network.
4. Find the device IP address on your router page.
5. Open Mobaxterm and click "Session", and click "SSH", enter the device IP into the
Remote host, and click "OK" (Note: your computer and the device needs to be under
the same network).
To Next Page
Loading...
Need help?
General
