125
Time Zone
The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol
(SNTP) to get the current time from an SNTP server outside your network. Choose your local time
zone. After a successful connection to the Internet, the router will retrieve the correct local time from
the SNTP server you have specified. If you prefer to specify an SNTP server other than the default,
simply enter its IP address as shown above. Your ISP may provide an SNTP server for you to use.
Current Date/Time: To show the current time based on the time synchronization mechanism users
choose below.
Synchronize time with: Select the methods to synchronize the time.
NTP Server automatically: To synchronize time with the NTP server.
PC’s Clock: To synchronize time with the PC’s clock.
Manually: Select this, user need to set the time yourself manually.
Time Zone: Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight Saving: Select this option if you use daylight savings time.
NTP Server Address: Enter the IP address of your time server. Check with your ISP/network
administrator if you are unsure of this information.
To Next Page
Loading...
Need help?
General
