EasyManua.ls Logo

Billion BiPAC 5200N - Local Area Network (LAN) Setup

Billion BiPAC 5200N
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.2.2 LAN
A Local Area Network (LAN) is a shared communication system to which many computers are
attached and is limited to the immediate area, usually the same building or floor of a building.
Router Local IP
IP Address: Enter the IP address of ADSL Router in dotted decimal notation, for example,
192.168.1.254 (factory default).
IP Subnet Mask: The default is 255.255.255.0. User can change it to other such as
255.255.255.128.
Dynamic Route: Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Direction: Select the RIP direction from None, Both, In Only and Out Only.
Multicast: IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish
membership in a Multicast group - it is not used to carry user data. The BiPAC 5200N supports both
IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable it
IGMP Snoop: Choose Disabled or Enabled IGMP Snoop function.
DHCP
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
37

Other manuals for Billion BiPAC 5200N

Related product manuals