120
finding out the IP address of the router. This helps if you do not know the router’s IP address.
Follow the steps below to access web configuration.
Step 1: Click Start and then Control Panel.
Step 2: Double-click Network Connections.
Step 3: Select My Network Places under Other Places.
Step 4: An icon describing each UPnP-enabled device shows under Local Network.
Step 5: Right-click on the icon of your BiPAC 7300(N) and select Invoke. The web
configuration login screen displays.
Step 6: Right-click on the icon of your BiPAC 7300(N) and select Properties. A properties
window displays basic information about the BiPAC 7300(N).
To Next Page
