Prioritization
Application: Assign a name that identies the new QoS application rule.
Time Schedule: Scheduling your prioritization policy.
Priority: The priority given to each policy/application. Its default setting is set to High; you may
adjust this setting to t your policy/application.
Protocol: Select the supported protocol from the drop down list. For GRE protocol, there is no
need to specify the IP addresses or Application ports in this page. For other protocols, at least one
value shall be given.
any: No protocol type is specied.
tcp
udp
icmp
gre: For PPTP VPN Connections.
Source/Destination Port: The packet source/destination port to be monitored.
Source/Destination IP Address Range: The source/destination IP address or range of packets to
be monitored.
Priority: The priority given to each policy/application. You may adjust this setting to t your policy
/ application. For examples, you are allowed to specify two different QoS policies for different
137
To Next Page
Loading...
