DSP Firmware Version: Displays the SHDSL line code rmware version.
Connected: Displays current SHDSL line sync status.
Line State: Displays current SHDSL line status.
Bit Rate: Displays SHDSL line synch speed rate.
SNR Margin: Displays SNR value when line is synchronized. It indicates the signal quality; the
higher the ratio, the higher signal quality it has.
Line Attenuation: Displays signal attenuation. The longer loop dostance, the larger line
attenuation value is.
Click Apply to conrm the settings.
False 4-wired Connection
This mode is used when 4-wired connection is disabled.
80
To Next Page
Loading...
