Binatone iDECT L1i System - Using Your Phone; Power on the Handset; Make an External Call

9
USING YOUR PHONE
4
4.1 Power on the Handset
If your handset is turned off, press and hold <Off> to turn on the handset.
You can press and hold <Off> again to power off the handset.
4.2 Make an External Call
4.2.1 Preparatory dialling
Enter the phone number and press <Talk> or <SPEAKERPHONE> to dial
the number. When entering a number, if you make a mistake, press [ Clear ]
to delete digits.
4.2.2 Direct dialling
Press <Talk> or <SPEAKERPHONE> to take the line, then enter the phone
number.
( Note: If you enter a wrong digit you can not correct it with [ Clear ] key.)
4.2.3 Call from the phonebook
Press [ PB ] to access the phonebook and press <UP/DOWN> to find the
desired phonebook entry.
Press <Talk> or <SPEAKERPHONE> to dial out the selected phonebook
entry.
4.2.4 Call from the call list
Press <RIGHT> to access the call list and press <UP/DOWN> to find the
desired call list entry.
Press <Talk> or <SPEAKERPHONE> to dial out the selected call list entry.
4.2.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to find
the desired redial number.
Press <Talk> or <SPEAKERPHONE> to dial out the selected redial
number.
4.2.6 Call timer
Your handset automatically times the duration of every call. It is shown in
hours, minutes and seconds (HH:MM:SS) on the display from when you
answer a call or after dialling a number, until 5 seconds after the end of the
call.
4.2.7 Handset speakerphone
During a call, you can press <SPEAKERPHONE> to alternate between
hands-free speakerphone and normal handset use.