10
4.3 Answer a Call
If the handset is not on charge or Auto Answer (see 8.1.7) is turned off:
When the phone rings, press <Talk> /<SPEAKERPHONE> / [ Accept ] to
answer a call.
If the handset is on charge and Auto Answer (see 8.1.7) is set to On :
When the phone rings, pick up the handset to answer a call automatically
without having to press any buttons.
4.4 End a Call
During a call , press <Off> to end the call.
OR
Put the handset on the base station or charger pod to end the call.
4.5 Call Adjust Earpiece and Speakerphone Volume
5 volume levels (Level 1 to Level 5) can be set for each of the earpiece
and speakerphone volumes.
During a call: Press <UP> or <DOWN> to increase or decrease the volume
level respectively.
The current setting is shown.
When you end the call, the volume settings will remain at the last selected
level.
4.6 Mute a Call
You can talk to someone nearby without letting the caller hear you during a
call.
During a call: Press [Mute] to mute the microphone.
The display shows "Call Mute" and your caller cannot hear you.
Press [Unmute] to unmute the microphone to continue your
conversation.
4.7 Turn off the Handset Ringer
In idle, press and hold <#> to turn off the ringer. The “RINGER OFF” icon is
displayed on the LCD.
If the ringer is off, press and hold <#> to turn it back on.
4.8 Redial
The last 20 numbers dialled are saved in the Redial list. If you have stored
a name in the phonebook that matches the number, the name will be
displayed instead, and you can press [Select] to see the number.
To Next Page
Loading...
