Binatone iDECT L1i System - Redial a Number from the Redial List; Save a Redial Number into the Phonebook; Delete a Redial Number; Delete All Redial List Entries

11
4.8.1 Redial a number from the redial list
1. Press <DOWN> to access the redial list.
2. Press <UP/DOWN> to browse the redial list.
3. Press <Talk> to dial the selected redial number.
Note: If there are no numbers in the redial list, the display shows List
Empty.
4.8.2 Save a redial number into the phonebook
1. Follow steps 1 and 2 in section 4.8.1.
2. Press [ Select ] to select the redial number.
3. Press [ Menu ] and <UP/DOWN> to scroll to Add to PB.
4. Press [ Select ] and then enter the name, edit the number if necessary
and select the melody.
Note: Press [ OK] after entering the name to go to next step of editing the
number, and then press [ OK ] to go to the final step of selecting the
melody. Press <UP> or <DOWN> to scroll through the melody options.
( Note: the selected melody will only be played if you subscribe to Caller
Display and the incoming number matches the stored number.)
5. Press [ Select ] to save the redial number into the phonebook.
4.8.3 Delete a redial number
1. Follow steps 1 and 2 in section 4.8.2 .
2. Press [ Menu ] and <UP/DOWN> to scroll to Delete.
3. Press [ Select ] and then [OK ] to confirm the Delete.
4.8.4 Delete All Redial list Entries
1. Press <DOWN> to access the redial list.
2. Press [Select] then [ Menu ] and <UP/DOWN> to scroll to Delete All.
3. Press [Select ] and then [ OK ] to confirm the Delete All.
4.9 Keypad Lock
You can lock the keypad so that it cannot be used accidentally while
carrying it around.
1. To lock the keypad: In idle mode, press and hold <*> key, the <Keypad
lock icon>will display.
2. To unlock the keypad: In idle mode, press and hold <*> key, the
<keypad lock icon> will disappear.
Note: If the lock is on, you can still use <Talk> to answer a call when a
handset is ringing.