3
INSTALL YOUR PHONE2
2.1 Connect the Base Station
1) Plug the power supply and the line cord into the base station.
2) Plug the power adaptor into a 230Vac, 50HZ mains socket, and the line
cord into your telephone line socket.
3) Always use the cables provided in the box.
Warning: Use only the power adaptor supplied, using another power supply
may cause a hazard, and will result in non-compliance with EN60950,
which will invalidate any approval given to this apparatus.
Warning: The power adaptor should be plugged in near the equipment and
be easily accessible.
NOTE: The base unit needs mains power for normal operation, not just for
charging the handset batteries.
NOTE: Do not install close to another telephone or other electrical
equipment - this can cause interference.
To Next Page
Loading...
