Binatone iDECT L1i System - Set the Alert Tones; Rename the Handset; Set the Contrast Level

234
8.1.4 Set the alert tones
Three different alert tones are set on by default, but can be turned off, if
desired.
Key tone- a single beep is emitted when you press a key.
Battery Low - a tone is emitted while you are talking on the phone to alert
you that you need to charge the batteries.
Out Of Range - a tone is emitted while you are talking on the phone to alert
you to move closer to the base unit, before the call is lost.
1. Press [ Menu ] and <UP/DOWN> to scroll to HS Settings.
2. Press [ Select ] and <UP/DOWN> to scroll to Tone Setup.
3. Press [ Select ] and <UP/DOWN> to scroll to Key Tone / Battery Low /
Out of Range.
4. Press [ Select ] and <UP/DOWN> to scroll to On or Off.
5. Press [ Select ] to confirm your alert tone setting.
8.1.5 Rename the handset
To change the name that appears on the display in idle mode:
1. Press [ Menu ] and <UP/DOWN> to scroll to HS Settings.
2. Press [ Select ] and <UP/DOWN> to scroll to Rename HS.
3. Press [ Select ] and then enter your new name for the handset. Press
[ Clear ] to delete the last character or press and hold [ Clear ] to delete
characters long.
4. Press [ OK ] to confirm the new name.
8.1.6 Set the contrast level
To change the contrast of the handset display:
1. Press [ Menu ] and <UP/DOWN> to scroll to HS Settings.
2. Press [ Select ] and <UP/DOWN> to scroll to Contrast.
3. Press [ Select ] and <UP/DOWN> to scroll to your desired contrast level
(5 contrast levels are provided). The respective contrast effect will
display while browsing the contrast level list.
4. Press [ Select ] to confirm the contrast setting.
the whole character string. Note: The handset name can be up to 12