BD / ED / FD (E2) 03/2019 page 46/68
Chamber size FD 23 FD 53 FD 115 FD 240
Different electrical data for FD-UL constructed for the USA and Canada
(model versions FD023UL-120V, FD053UL-120V, FD115UL-120V, FD240UL-208V)
Nominal voltage (±10 %)
at 60 Hz power frequency
V 115 115 115 208
Current type 1N~ 1N~ 1N~ 3N~
Nominal current Amp 7.0 10.5 14.0 11.2
Power plug NEMA 5-15P 5-20P 5-20P L21-20P
Chamber fuse
6,3 x 32 mm / 250V / super time-lag TT
Amp
12,5
external
16
external
16
external
3 x 16
internal
Environment-specific data
Noise level (mean value) dB (A) < 55 < 55 < 55 < 55
Energy
consumption
at 70 °C / 158 °F
Wh/h 145 172 230 370
at 150 °C / 302 °F
Wh/h 300 429 544 850
at 300 °C / 572 °F
Wh/h 720 951 1100 1400
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +22 °C ± 3 °C / 71.6 °F ± 5.4 °F and a power supply voltage fluctuation of ±10. Technical data is
determined in accordance to BINDER Factory Standard Part 1:2015 following DIN 12880:2007.
All indications are average values, typical for units produced in series. We reserve the right to
change technical specifications at any time.
If the chamber is fully loaded, the specified heating up times may vary according to the load.
DOMINIQUE DUTSCHER SAS
To Next Page
Loading...
