To Next PageTo Next PageWhat to do if Binder APT.line FD 23 chamber doesn’t heat up but the red light is lit?
If the chamber in your Binder Accessories unit isn't heating up but the red heating control light in the display is lit, contact BINDER service.
General| Volume | 23 liters |
|---|---|
| Category | Accessories |
| Series | APT.line |
| Model | FD 23 |
| Capacity | 23 liters |
| Brand | Binder |
| Temperature range | 5 °C above ambient temperature to 300 °C |
| Power supply | 230 V |
| Power consumption | 800 W |
| Material | Stainless steel |
Details type plate information and general safety for installation and operation.
Defines the approved applications for Incubators BD and Heating Ovens ED/FD.
Details electrical connection requirements and plug types for various unit models.
Covers temperature set-points, ramp functions, time functions, and user level adjustments.
Describes Class 2 and Class 3.1 temperature safety devices and their functions.
Lists common faults, causes, and recommended corrective actions.
