M (E2) 04/2019 page 56/71
15.5 Equipment and options (extract)
To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Microprocessor display program controller
Communication interface RS 422
Program controlled air flap
Programmable automatic ventilation
∅
Temperature safety device class 2 acc. to DIN
12880:2007 with optical temperature alarm
Four castors (2 lockable)
Access ports, various diameters, with silicone plug
Rack, chrome-plated or stainless steel
Perforated rack ,stainless steel
Securing elements for additional fastening of racks (4 pc.)
Reinforced rack with rack lockings
Reinforced inner chamber with 2 reinforced racks
Temperature safety device class 3.1 acc. to DIN
12880:2007, available via BINDER Individual
Door(s) with window and interior lighting
FKM door gasket (temperature resistant up to 200 °C)
HEPA Fresh air filter, class H 14 (DIN EN 1822)
Measurement protocol of air change rate acc. to ASTM D
5374
Inert gas connection (inlet and outlet) with mostly gas-
-- -- --
Additional flexible Pt100 temperature sensor with external
Additional measuring channel for digital object tempera-
ture display with flexible Pt100 temperature sensor
Analog output 4-20 mA for temperature with 6 pole DIN
socket, DIN plug included
Temperature calibration including certificate
Spatial temperature measurement including certificate
Sturdy trolley, castors with locking brakes
Legend: Standard equipment Optional -- Not available