Need help?Do you have a question about the BIO UV COMBIPOOL RH/REDOX and is the answer not in the manual?
General| Redox Potential | Adjustable, typically 650-750 mV |
|---|---|
| Application | Swimming Pools, Spas |
| Control | Automatic Redox (ORP) control |
| UV Lamp Power | 40 W |
| Housing Material | Stainless Steel |
| Power Supply | 230V / 50Hz |
| Certifications | CE |
Shows external components of the device with labels.
Shows internal components of the device with labels.
Instructions for mounting the unit on a wall.
Details electrical connections and wiring diagrams for the device.
Instructions on handling, care, and winterizing the pH probe.
Explains how to connect the inlet and outlet tubes for chemical injection.
Illustrates the overall installation layout of the system in a pool.
Explains the importance of maintaining pH and TAC levels.
Lists recommended filtration maintenance tasks.
Details the role of Redox and UV sterilization in algae control.
Outlines initial setup steps and factory settings for the device.
Describes how to perform manual injections for pH and Redox.
Explains how to adjust pH and Redox set-points directly from the home screen.
How to change the device's display language.
Accessing settings related to Redox measurement.
Accessing settings related to pH measurement.
Information on the flow setting for filtration control.
Selecting the calibration mode for probes.
Setting or disabling the device password.
How to save the configured settings.
Explains the OFA STOP alarm and its causes.
Lists various alarms and actions to perform.
Procedure for active pool winterizing.
Procedure for passive pool winterizing.
To Next Page
