S430 User Manual
9
2 Environmental Requirements of Software
Please read the manual of Windows XP or higher version before
reading this section. Windows XP is recommended.
When the operating system is Windows Vista or higher version,
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
please run the software under administrator account. Otherwise the
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
software may not run properly.
．．．．．．．．．．．．．．．．．．．．．．．．．．
Please change the setting in Power Options“Put
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
the computer to
．．．．．．．．．．．．．
sleep” to “Never”. Otherwise it may cause an error while running
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
Prolab.
．．．．．．．
2.1 PC Requirements
2.1.1 Hardware Requirements
Hardware Requirements
CPU Intel 2.5GHz or same level CPU
Memory No less than 2G
Hard drive No less than 1G space
USB port USB2.0
Monitor Resolution 1024*768 or above
Color 16bit or above
2.2 Install Prolab
Boot your computer.
Insert the Prolab disk, then open “My computer”.
Select your CD Rom in the browser.
Double click “Setup” to install.
Follow the steps and finish setup, then restart the computer.
To Next Page
Loading...
Need help?
General