S430 User Manual
33
1) Data mode: Data display as Abs.,or Trans.
2) Wavelength: Input time scan wavelength.
3) Unit: Set time unit to sec or ms.
4) Time: Set the scan time.
5) Interval: Fixed at 0.1 sec.
6) Delay: Delay time before scan.
7) Slit: Fixed at 8nm.
8) Replicate:
Set the number of repeat measurements.The instrument will
only scan once when it’s 1.
9) Cycle time:
Set a repetition interval.
3. Monitor Tab
1) Y Axis: Enter the max and min point of Y axis.The max point should be
larger.
2) Auto Zoom: Y axis will automatically set by spectrum data.
4. Processing Tab：
To Next Page
Loading...
Need help?
General