S430 User Manual
42
1) To change sample name, description and concentration: Click ,
then double click in the table to modify the content you want. Then click
to confirm.
2) Measure a standard sample: Click to select a sample in the table, then
click button. The instrument will start measurement.
3) Add Sample: Click , then click . There will be another
line in the standards window. Click to finish.
4) Delete Sample: Click and click a line you want to delete, then
click . Click to finish.
5) Choose the sample data needed in curve calculation: Click , then
click the check mark in row if you want to use this data for
calculation.
6) Set sample cell: Click and set sample cell of samples in
colume. “-” means do not move sample cell. Click to finish.
2. Click to build the curve of standard sample when finishing
measurement.
To Next Page
Loading...
Need help?
General