4) Fluorescent Light
The BSC is equipped with straight tube type energy-saving fluorescent lamp. It can make sure
average illumination inside work area which meets standard requirements.
5) Air pipe
Air pipe is the ventage of differential pressure sensor.
The air pipe should not be blocked and please do not hang anything on the pipes,
otherwise it will effect wind speed and pressure.
6) Water proof Socket
Waterproof Sockets are located on the right side of the work area, which can be controlled by
SOCKET button.
(1) Please make sure the total load of sockets should be ≤ 230V*1.5A；
(2) Fuse protector：（see Picture 13）
The equipment is equipped with main power fuse, waterproof socket fuse and fan fuse They are
located near the power cord’s outlet. Fuse label is corresponding to the relevant specifications.
7) LCD Display
LCD display (Liquid Crystal Display) :place liquid crystals between two paralleled glass.
Between the two pieces of glass there are many vertical and horizontal small wires, through power-
control we can change the direction of crystal molecule.the light refraction creates the image, low
power consumption without electromagnetic radiation.
To Next Page
Loading...
