Biodom C15 - Manufacturer Responsibility and Standards; Manufacturer Liability; Compliance Standards

Biodom C15 | instructions for use, maintenance and installation | February 2019
17
If the pellet boiler changes ownership to another person, this person must also receive these
instructions for use, together with the boiler.
If the instructions get lost, request for a new copy of instructions from the manufacturer, authorized
reseller or repairman.
RESPONSIBILITY OF MANUFACTURER
In providing these instructions, Company Biodom rejects any civil or penal liability, direct or indirect,
due to:
• accidents caused by non-compliance with standards and specifications from these instructions;
• accidents caused by prohibited or incorrect use by the user;
• accidents caused by modifications and repairs not authorized by manufacturer Company
Biodom;
• poor maintenance;
• unforeseeable events;
• accidents caused by use of non-original or improper spare parts.
The installer is fully responsible for installation.
5.1. BASIC PREVENTIVELY REQUIRED STANDARDS
Product Biodom C15 is manufactured in accordance with the following standards:
DIRECTIVE EC ON MACHINERY (2006/42/EC);
DIRECTIVE EC ON LOW-VOLTAGE EQUIPMENT (2014/35/ES);
DIRECTIVE EC ON ELECTROMAGNETIC COMPATIBILITY (2014/30/ES);
Harmonized standards:
• EN 303-5:2012
• EN 60335-1:2012+A11:2014
• EN 60335-2-102:2006+A1:2010
• EN 55014-1:2008/A2:2012
• EN 55014-2:1998/A1:2002/A2:2009
• EN 61000-3-2:2015
• EN 61000-3:2014/EC:2016