Biodom C15 - Boiler Commissioning and Safety; Commissioning Process; General Safety and Combustion

Biodom C15 | instructions for use, maintenance and installation | February 2019
28
BOILER COMMISSIONING
Boiler commissioning can be performed only by a manufacturer authorized technician, otherwise
the warranty is void.
INSTRUCTIONS FOR SAFETY OF PERSONS, ANIMALS AND PERSONAL PROPERTY
We wish to inform the installer on some general guidelines, which must be complied with for correct
installation of pellet boiler. These are required standards, but are not sufficient; for further and more
detailed information it is necessary to read the rest of the Instructions for use, maintenance and
installation.
• Connect the pellet boiler to electrical network.
• Do not allow children or animals in the boiler area.
• Use only quality pellets and no other types of fuel.
• Inform all users on possible risks and hazards, and educate them on handling the pellet boiler.
• If the pellet boiler is placed on a wooden floor, it is advisable to protect the floor in accordance
with regulations.
ATTENTION
The pellet boiler operates by creating negative pressure in the combustion chamber.
Therefore, ensure that the extraction of smoke gases is thermally sealed.
Upon first start-up (minimum operation of boiler – 1 hour), paint evaporates fumes, which
have unpleasant odour. Therefore, ventilate the room afterwards.
SAFETY WARNINGS
8.1. SAFETY WARNINGS FOR MAINTENANCE STAFF
Along with adhering to general safety regulations, maintenance staff must also:
• always use safety devices and individual safety equipment according to Directive 89/391/EEC;
• disconnect power supply before commencing any work;
• always use suitable tools;
• before commencing any work on the boiler, ensure that the boiler, as well as the ashes in it,
are cold, especially before touching it;
• PELLET BOILER IS NOT TO BE CONSIDERED USABLE, IF EVEN ONE SAFETY DEVICE IS
MALFUNCTIONING, INCORRECTLY REPAIRED OR NOT FUNCTIONING;
• do not perform any modifications of any type for whatever reason other than those allowed
and/or approved by the manufacturer or authorized person;