Biodom C15 | instructions for use, maintenance and installation | February 2019
41
12.4. TIME PROGRAMME SETTING
On your boiler you have the option of setting a daily-weekly timer. You can program up to 3 time
framed ON/OFF for each day. To set a daily-weekly timer on the boiler, you need to do the following:
1. By pressing the MENU button (until CLOCK is displayed), the MENU timer for the setting timer
control opens.
2. By pressing the + button, we come to the TEN option. Selecting the ON or OFF function switches
ON/OFF the time control of the program.
3. Each of the 6 time programs for 7 days, which you can adjust according to your needs, is limited to
the initial (P1A - program 1 start time) and closing time (P1D - program 1 end time).
4. The P1 t symbol allows you to adjust the water temperature for each program (located on the top
display), for example for t H20 1 (located on the lower display) of the first program, you have the P1t,
etc.
5. By pressing the + button, you arrive at the time schedule for each day of the week. For example, on
Monday, the DAY1 is displayed on the top display, and on the lower T1P1, T2P2 and T3P5 (which we
find to by pressing the MENU button), which means that the boiler will work on time programs in P1,
P2 and P5 on Monday.
If we do not want a 3 time switch ON/OFF, it is necessary to deactivate the other timed framed
programs.
For example, if there are two time periods for DAY7, then the next program should continue
T1P1, T2P4, T3P0 (P0 tag, indicates that the program is not active).
By selecting the ON/OFF option or by pressing the MENU button, you can exit the program.
To Next Page
Loading...
