Need help?Do you have a question about the Biodom C15 and is the answer not in the manual?
Guide covering setup, operation, and upkeep of the Biodom C15 pellet boiler.
Fields for user details, purchase date, and serial number for warranty.
Fields for installer, installation date, and contact information.
Packaging disposal, suffocation danger, and electrical safety.
Restrictions for smoke gas discharge to prevent operational issues.
Earthing, measurement, and sealed extraction needs.
Children safety, sealant rope, and fire incident procedures.
Fuel type, lifting safety, pellet quality, and storage.
Thermal power, efficiency, consumption, and emissions.
Water volume, pressure, weight, voltage, and safety level.
Visual representation of the boiler's physical dimensions.
Reflects current product state; must be read and heeded.
Disclaimer for various operational and maintenance issues.
Lists EU directives and harmonized standards the product adheres to.
Safety advice for moving and handling the boiler.
Compliance, safety checks, and documentation requirements for installers.
General responsibilities and safety standards for installation.
Wall/floor protection and positioning according to drawings.
Air intake, ceiling passage insulation, and boiler levelling.
Flue connection rules, resistance, and air supply requirements.
Cable routing, protection, and connection checks.
Prohibited connections, earthing, and pipe standards.
Prohibition of poor condition or unsuitable flue pipes.
Use of cleaning doors and pipe connection orientation.
Requirements for smoke pipe passage through roofs.
Ensuring fresh air for combustion via openings and prohibitions.
Cable details and replacement procedures.
Wiring, earthing, cable temp, and bipolar switch needs.
Cable types and mandatory smoke gas measurements.
Procedure by authorized technician for warranty.
Installation compliance, user education, and combustion chamber pressure.
Boiler surfaces, children, fuel, maintenance, and malfunction handling.
Prohibitions on flammable liquids and correct pellet usage.
Vacuuming ashes when cool and avoiding abrasive products.
Vacuuming ashes from container and chamber.
Combustion container seating and sealant rope checks.
Cleaning dust bin, ash containers, and smoke pipes.
Cleaning exhaust fan and checking components for efficiency.
Yearly service by authorized personnel for optimal performance.
Product quality, installation importance, and flue sealing.
Using correct pellets and careful filling of the container.
Precautions for lifting pellet bags.
Manufacturer liability and proper pellet storage.
Identification of buttons and displays on the control panel.
Explains display information and indicator lights.
Information shown during burning and standstill phases.
Basic functions of ON/OFF, UP, and DOWN buttons.
How to use the MENU button for settings and navigation.
How the boiler operates and displays information.
Procedures for starting, stopping, and the sequence of displays.
Instructions for programming daily-weekly timers for boiler operation.
Visual representation of timer settings and program schedules.
Step-by-step guide for navigating the timer menu.
Explanations for status messages like OFF, TEST, HEAT UP, BURN.
Meanings of various alarm messages.
Meanings of additional alarm messages.
List and description of various menu options for boiler settings.
Steps to resolve issues related to unsuccessful ignition.
Steps to resolve issues related to lack of pellets.
Steps to resolve issues related to lack of underpressure.
Steps to resolve issues related to insufficient airflow.
Steps to resolve issues with safety thermostat activation.
Steps to resolve issues with excessive flue gas temperature.
Steps to resolve issues with flue gas sensor detection.
Steps to resolve issues with firebox temperature detection.
Steps to resolve issues with boiler water temperature sensor.
Steps to resolve issues with return water temperature sensor.
Identification of buttons and displays for initial setup.
Basic functions of ON/OFF, UP, and DOWN buttons.
Detailed usage of the MENU button for settings and navigation.
Step-by-step guide for the initial start-up process.
Understanding LED signals and information shown on displays.
List of information accessible through the menu.
Conditions for warranty validity, including usage and maintenance.
Duration and procedures for claiming warranty.
Conditions voiding warranty and manufacturer liability limits.
Components not covered by warranty due to normal wear and tear.
To Next Page
General
