Biodom C15 - Boiler Operation Displays and Buttons; Boiler Operation Displays; Control Button Operations

Biodom C15 | instructions for use, maintenance and installation | February 2019
38
Display during boiler operation in burning phase
Upper display:
upper display alternately shows:
BURN and then P5D5, where Px means actual current operation power
and DX set operation power
Lower display: lower display alternately shows:
Temperature of smoke gases: 155
Temperature of water in the boiler: B72
Temperature of return water: r45
Display during boiler standstill:
Upper display:
OFF
Lower display: Time: 18:35
Button Function
ON/OFF button
Press and hold to turn the boiler on/off.
Short press to return to basic display.
+
Button UP
Press during operation to increase set power.
When pressing MENU button beforehand, this button increases
desired water temperature in the boiler. In menu mode, we select
desired submenu by pressing.
-
Button DOWN
Press during operation to decrease set power.
When pressing MENU button beforehand, this button decreases
desired water temperature in the boiler. In menu mode, we select
desired submenu by pressing.