Bionet BM3 - Equipment Connection; Maintenance and Cleaning

BM3 www.BIO2NET.com
Revision A
- 9 -
NOTE
BM3 is classified as follows. :
- It is a class I type-CF Class equipmen
t in terms of electrical shock prevention. It is not
proper to operate this Equipment around combustible anesthetic or dissolvent.
- The noise level is “B” Class according to the IEC/EN 60601-1 (Safety of Electric
Medical
Equipment), and the noise redemption is “B” Level according to the IEC/EN 60601-1-2
(Electromagnetic Compatibility Requirements).
Equipment connection
CAUTION
In the hospital, doctors and patients are expose to dangerous, uncontrollable
compensating currents. These currents are due to the potential differences between
connected equipment and reachable conducting parts often in the medical rooms.
The safety solution to the problem is accomplished with consistent equipment
Maintenance and Cleaning
Using various methods can clean BM3 and its accessories. Please follow the
methods mentioned below to avoid unnecessary damage or contamination to
the Equipment.
In the event that harmful (unauthorized) materials are used for cleaning, the
damaged or contaminated Equipment shall not be serviced without charges
regardless of warranty period.
Caution!
Please check carefully both frame and sensor, after cleaning the Equipment, Do
not use the Equipment that is worn out or damaged.