ANTSPACE HK3 Water cooling container & Dry-Wet Tower Product Manual
70
Figure 9-1 Location of butterfly valves and pipeline filters for pipeline maintenance
d) Remove and clean (or replace) the filter screen inside the filter. Reference .
e) Install the cleaned filter screen, tighten the clamp with a wrench, and close the valve
f) After the equipment is powered on again, fill the system replenishment tank with coolant.
g) .
h) Install the cleaned filter screen, tighten the clamp with a wrench, and close the valve
i) After the equipment is powered on again, fill the system replenishment tank with coolant.
Figure 9-2 Remove the pipeline filter
2) Pipeline Leakage Maintenance
To Next Page
Loading...