BIXOLON SRP-350plusIII User Manual

SRP-350plusIII/352plusIII
Ver. 2.00
- 33 -
5. Self-Test
The self-test checks whether the printer has any problems.
If the self-diagnostics reveal no error in the printer, please see other device or
software.
If the printer does not run normally, please contact the place of purchase.
- Do not open the top cover while the printer is running.
It may damage the printer.
- If the printer does not run normally, please contact Customer Center.
1) Check whether paper is inserted correctly.
2) Turn on the power while holding down the FEED button and the self-test begins.
3) The self-test prints the current status of the printer including control ROM version
and the DIP switch settings.
4) After printing the current printer status, the printer wait for the next step after
printing the following lines. (The paper signal light keeps blinking.)
SELF-TEST PRINTING.
PLEASE PRESS THE FEED BUTTON.
5) Press the FEED button to continue printing. The printer prints a form using the
built-in character sets that can be printed.
6) The self-test ends automatically and the printer cuts the paper after printing the
following line.
*** COMPLETED ***
7) The printer is ready to receive data for normal operation upon completion of self-
test operation.

BIXOLON SRP-350plusIII Specifications

General

Type	POS printer
Character size	24 x 24 mm
Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Gray
Maximum roll diameter	83 mm
Supported paper width	80/58 mm
Maximum printing width	72 mm
Printing media thickness	50 - 80 µm
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
USB port	Yes
Serial interface type	RS-232
USB 2.0 ports quantity	1
Connectivity technology	Wired
Wi-Fi	No
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 39, Code 93, Code-128 Codabar Library, Data Matrix, EAN13, EAN8, ITF, ITF-14, ITF-25, Micro QR Code, QR Code, UPC-A, UPC-E
Autocutter durability	1.8 million cuts
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	146 mm
Width	145 mm
Height	204 mm