BIXOLON SRP-350plusIII - Technical Specifications; Printer Performance Specifications; Environmental and Lifespan Specifications

SRP-350plusIII/352plusIII
Ver. 2.00
- 37 -
8. Specifications
8-1 Printer Specifications
Printing Method
Thermal transfer printing
Dot Density
SRP-350plusIII: 180 dpi (7dots/mm)
SRP-352plusIII: 203 dpi (8dots/mm)
Printing Width
3-inch
72 mm
2-inch
48 mm
Roll Width
3-inch
79.5±0.5 mm
2-inch
57.5±0.5 mm
No. of Characters per Line
(Default Value)
SRP-350plusIII
: 42 (Font A), 56 (Font B), 56 (Font C)
SRP-352plusIII
: 48 (Font A), 64 (Font B), 64 (Font C)
Printing Speed
SRP-350plusIII: Max. 300 mm/sec
SRP-352plusIII: Max. 270 mm/sec
Receiving Buffer Size
4K bytes
AC/DC Adapter
Input Voltage
100~240 VAC
Frequency
50/60 Hz
Output Voltage
24 VDC
Environment
Condition
Temperature
Operating: 0 ~ 40 ℃
Storage: -20 ~ 60 ℃
Humidity
Operating: 10 ~ 80 % RH
Storage: 10 ~ 90 % RH
Paper excluded
Life Span
Printer Head
150 Km
Auto Cutter
1,800,000 cuts
MCBF
Printer Mechanism
70,000,000 lines
The specifications were determined based on operation at normal
temperature using designated paper on default settings.
They are subject to change depending on temperature or printing
level. Printing speed may become slightly slower depending on
the data transmission speed and the combination of commands.