BIXOLON SRP-F310 - Specification; Printer Specifications

Rev. 1.00
- 23 -
SRP-F310/312/313II
4. Specification
Printing method
Thermal line printing
Dot density
SRP-F310II: 180dpi(7dots/mm)
SRP-F312II: 203dpi(8dots/mm)
SRP-F313II: 203dpi(8dots/mm)
Printing width
SRP-F310II: 72mm
SRP-F312II: 72mm
SRP-F313II: 80mm
Paper width
79.5±0.5mm/82.5±0.5mm
Characters per line (default)
SRP-F310II: 42(Font A), 56(Font B)
SRP-F312II: 48(Font A), 64(Font B)
SRP-F313II :53(Font A), 71(Font B)
Printing speed
SRP-F310II: 82.74 lines/sec, Max. 350mm/sec
SRP-F312II: 93.33 lines/sec, Max. 350mm/sec
SRP-F313II: 93.33 lines/sec, Max. 350mm/sec
Receive Buffer Size
4K Bytes
※ NOTE: Printing speed may be slower, depending on the data transmission
speed andthe combination of control commands.
Supply voltage
SMPS Input voltage
100~240VAC
Frequency
50/60Hz
SMPS Output voltage
24VDC
Environmental
Conditions
Temperature
0~40 ℃ (Operating)
-20~60 ℃ (Storage)
Humidity
10~80 % RH (Operating)
10~90 % RH (Storage)
; Except for paper
LIFE *
Printer Head *)
250 Km
Auto Cutter
3,000,000 Cut
MCBF *
Printer Mechanism *)
70,000,000 lines
*) The specifications were determined based on operation at normal temperature
using designated paper on default settings. They are subject to change
depending on temperature or printing level.
*) The specifications were tested according to standard reliability.
If you want to test the product to determine its life cycle, please contact us for
more details and comply with the standard reliability for testing.
** The switch is the disconnecting device. Turn off switch from any hazard.