1.5 Machine description Bread Slicer
GENERAL
6.009.98.5.10.02
The machine is designed with the following
guards and protective devices:
The Bizerba Bread Slicer is a universal device
for slicing bakery products like bread-- also
Eco--breads with a hard and thick bread crust.
You may halve or quarter the bread or cut it
into individual slices.
The circular blade with a special toothing is
electronically driven.
The product clamp on the right side as well
as the slice holder on the left side prevent the
product from slipping and moving.
The complete machine housing is made of
stainless steel, the front plate of anodized
aluminium.
The protective cover is made of transparent,
fracture--resistant and foodstuff--friendly
plastics.
All materials used in the food zone and
processing area are designed in conformity
with the applicable sanitation requirements.
All bearings in the visual area are lubricated
with lubricating agents permitted for use in
food zones.
The function keys are integrated in the
operating and display foil.
The main switch uses a pilot lamp to control
the start of the machine.
A control contactor with a self--holding circuit
prevents the machine from being
automatically restarted after power failure.
S Front cover, fixed, non-- removable.
S Rear wall, non--removable.
S During slicing protective cover is locked.
No slicing possible if cover is open.
S Collecting bin for crumbs locked during
slicing.
S Product clamp disengaged when cover is
open.
S Control contactor in case of power failure.
8
To Next Page
Loading...
