6.1 Sanitizing / maintenance / servicing
Replace the blade as soon as the slicing quality
is unsatisfactory.
S Bring blade into cleaning position (see sec-
tion 5, page 28).
S switch off machine, disconnect power plug,
put on protective gloves!
S Loosen the 4 screws, lift blade .
S Put the removed and stump blade into the
package of the replacement blade and send
it to the enclosed address for sharpening.
The blade can be re--sharpened once or
twice.
S Place replacement blade on the cleaned
blade carrier and tighten the 4 screws.
Order no.: blade 94001000035
Blade replacement
ACCESSORIES
6.009.98.5.10.02
1 Shaft on product clamp
2 Slice holder guiding shaft
Slightly oil the shaft once a week with the BI-
ZERBA H1 oil contained in the accessory kit.
Order no.: 25 ml 60220007800
Aerosol can 450ml 94008900022
Maintenance
1
2
34
VERY IMPORTANT!
Caution!
Danger of injury by
exposed blade!
To Next Page
Loading...
