6.2 Disturbances
6.009.98.5.10.02
GENERAL INSTALLATION
OPERATING
ELEMENTS
OPERATION/
SLICING
CLEANING ACCESSORIES
OPERATING
CONDITIONS
BLADE RE-
PLACE-
MENT
Immediately switch off the machine if there is any rough operation or obstruction.
Contact the relevant BIZERBA after--sales service if you cannot eliminate occurring malfunctions yourself.
Display Significance, possible cause Remedial action
5 Slice thickness LEDs flash Output stage overheated Switch off machine for half an hour for cooling
down
6 Slice thickness LEDs flash Carriage motor overheated Switch off machine for half an hour for cooling
down
12 Slice thickness LEDs flash Collecting bin for crumbs is missing or not inser-
ted completely
Switch off machine.
Insert collecting bin for crumbs completely
Several slice thickness LEDs flash Switch off machine.
If LEDs still flash after switching it on again,
contact after--sales service.
All slice thickness LEDs flash Blade is in cleaning position Open protective cover for cleaning.
Switch off machine.
Disturbance Significance, possible cause Remedial action
Machine switches off itself during cutting pro-
cess
Blade motor overheated Machine can only be switched on again when
cooled down.
If not, contact after--sales service.
35
To Next Page
Loading...
