5.1 Preparing for cleaning
S Close protective cover.
S Hold down simultaneously keys “thin” and
“medium” for 3 seconds.
S The blade goes slowly into cleaning
position.
(all slice thickness LEDs flash)
+
CLEANING
6.009.98.5.10.02
5.2 Cleaning
S Open protective cover.
Switch off machine by means of the main
switch and disconnect the power plug!
S Put on protective gloves!
Blade
28
Thoroughly clean machine
before initial operation and
after each use.
If necessary, clean several
times a day. Also clean, if
machine was not in
operation after a longer
period or after sharpening.
Do not clean machine with
pressurized water or steam
cleaning equipment.
To Next Page
Loading...
