1.2 Warning notice
6.009.98.5.10.02
GENERAL INSTALLATION
OPERATION
ELEMENTS
BLADE
REPLACE-
MENT
CLEANING ACESSORIES
OPERATION
CONDITIONS
OPERATION/
SLICING
The adjacent warning notice
serves for your own safety and
should be observed. Failure to
comply with it could result in
serious bodily injury.
S For the space required, see the technical
data as per section 1.4.
S When operating the machine, pay special
attention to all movable parts, especially to
the blade.
S Prevent untrained personnel and
especially children from operating the
machine. Keep them away from the
operating area of the machine.
S Do not tamper with any protective devices
of the machine. Do not remove, change or
bypass them.Itmay result in serious bodily
injury.
S Operate concentrated.
S Do not use the machine for products other
than stated in the operating instructions.
S Do not cut frozen products.
S Equipment suitable for intermittent
operation.
S Have damaged power cables immediately
replaced by a qualified and certified
electrician or the relevant BIZERBA
after--sales service.
S Keep the working place clean and dry.
Provide a non--slippery supporting area.
S Keep the machine free of foreign objects.
S Before cleaning the machine, always
disconnect the power cable from the
mains.
S Immediately switch off the machine if there
are any strange noises or if the machine
starts operating though the protective
cover is still open or if there are any
obstructions which could result in serious
bodily injury.
S Contact the relevant BIZERBA after--sales
service if you cannot eliminate occuring
malfunctions yourself.
5
To Next Page
Loading...
