S Clean balde by pressing a humid (not wet!!)
disposable cloth against the blade surface
and slowly wiping from the center outward.
S Blade can be rotated manually.
S Do not use any abrasive cleaning tools.
They damage the Teflon coating of the
blade!
Blade cleaning
6.009.98.5.10.02
GENERAL INSTALLATION
OPERATING
ELEMENTS
OPERATION/
SLICING
CLEANING ACCESSORIES
OPERATING
CONDITIONS
BLADE RE-
PLACE-
MENT
S Switch on machine by means of main
switch.
S Close protective cover.
S Press key “One cut” = the blade goes back
into its basic position.
S Clean protective cover by means of a soft
cloth. Do not use any alcohol--containing
detergents!
29
VERY IMPORTANT!
Caution!
Danger of injury!
To Next Page
Loading...
