Bizerba BRS 38 - Page 18

If required, the factory--set slice thicknesses
may be changed and stored as fixed values:
S Press the keys “Reduce slice thickness --”
and “Increase slice thickness +” simulta-
neously and hold them down for 1 second.
(all 3 memory keys flash)
S Press selected memory key.
The assignedvalue is displayed (value flas-
hes).
S Set required slice thickness within the pos-
sible range.
S To save value press selected memory key
again.
S The key that was saved last before swit-
ching off the machine, is actived when swit-
c
h
i
n
g
o
n
a
g
a
i
n
t
h
e
m
a
c
h
i
n
e
.
Assigning of memory keys
and
or
or
or-- +
6.009.98.5.10.02
GENERAL INSTALLATION
OPERATING
ELEMENTS
OPERATION/
SLICING
CLEANING ACCESSORIES
OPERATING
CONDITIONS
BLADE
REPLACE-
MENT
15
If the keys “One cut” and “Indi-
vidual slices” flash, open pro-
tective cover.