BK Precision 9205 User Manual

36
Query syntax: STATus:QUEStionable[:EVENt]?
Parameter: None
Returned parameter: <NRf>
Relative command: STATus:QUEStionable:ENABle
The bit definition of query event enable register:
Bit
Position
15
14
13
12
11
10
9
8
Bit Name
Not
used
Not
used
Not
used
Not
used
Not
used
Not
used
Not
used
Not
used
Bit Weight
Bit
Position
7
6
5
4
3
2
1
0
Bit Name
Not
used
Not
used
Not
used
OT
OP
Not
used
OC
OV
Bit Weight
16
8
2
1
STATus:QUEStionable:CONDition?
This command is used to read the value of query condition register. When a bit of QUES
condition changes, the bit value corresponding in QUEST event register is 1.
Query syntax：STATus:QUEStionable:CONDition?
Parameter: None
Returned parameter: <NRf>
STATus:QUEStionable:ENABle
This command can set the parameter of quest event enable register. Setting parameter can
determine which bit value of quest event register is 1 and the bit will enable QUES.
Command syntax：STATus:QUEStionable:ENABle <NRf>
Parameter: 0~65535
Default set: Refer to *PSC command
Example: STATus:QUEStionable:ENABle 128
Query syntax: STATus:QUEStionable:ENABle?
Returned parameter: <NRf>
5.5 SYSTEM Subsystem
SYSTem:ERRor?
This command is used to query the error information of the power supply. When the error LED
lights on the front panel, it tells us that there is one or more hardware or command syntax error
happened. There are at most 20 groups of error message. Sending the command once will read
one error message from the error queue.
w ww . . co m
information@itm.com1.800.561.8187

BK Precision 9205 Specifications

General

Brand	BK Precision
Model	9205
Category	Power Supply
Language	English