BK Radio GPH-CMD Service Manual

Installation and Programming GPH-CMD VHF Radio
Page 2-12 BK RADIO
Press the [PRI] key to cycle through the priority channel options.
Setting the channel to MAIN ties the PR1 channel to the
Channel Selector knob.
Press the [ENT] key to store the new priority channel and
advance to the next field.
2.2.1.4.9 PRIORITY 1 GROUP
If the Priority 1 channel has been programmed as one of the 500
channels in the radio, the group where the channel resides must
be designated. If PR1 has been tied to the Channel Selector
knob (set to MAIN), or programmed OFF, the Priority Group field
is skipped.
Press the [PRI] key to cycle through the priority group options, or
press number keys to enter a group.
Press the [ENT] key to store the new priority group and advance
to the next field.
2.2.1.4.10 PRIORITY 2 CHANNEL
After the Priority 1 Group is set, the ‘Priority 2 Channel’ is
displayed. Any one of the 500 channels in the radios can be
designated as the Priority 2 channel, or PR2 can be tied to the
Channel Selector knob, or programmed OFF.
The PR2 channel cannot be altered during normal radio
operation.
Press the [PRI] key to cycle through the priority channel options.
Setting the channel to MAIN ties the PR2 channel to the
Channel Selector knob.
Press the [ENT] key to store the new priority channel and
advance to the next field.
2.2.1.4.11 PRIORITY 2 GROUP
If the Priority 2 channel has been programmed as one of the 500
channels in the radio, the group where the channel resides must
be designated. If PR2 has been tied to the Channel Selector
knob (set to MAIN), or programmed OFF, the Priority Group field
is skipped.
Press the [PRI] key to cycle through the priority group options, or
press number keys to enter a group.
Press the [ENT] key to store the new priority group and advance
to the next field.
PROG
GROUP 01
PRI-1 GROUP
PROG
CHANNEL 12
PRI-2 CHAN
PROG
GROUP 2
PRI-2 GROUP

BK Radio GPH-CMD Specifications

General

Brand	BK Radio
Model	GPH-CMD
Category	Portable Radio
Language	English