CHAPTER 3: INSTALLATION
13
3. Installation
The ServSelect IP system requires that the ServSelect IP software be installed prior
to use. ServSelect IP software allows you to view and control a server attached to
the appliance system, configure and maintain the system and prevent unauthorized
access to the appliance via IP connection.
NOTE:
The analog port does not require the ServSelect IP software for operation. The analog port uses
the On-Screen Display (OSD). For more information, see Chapter 4.
The ServSelect IP system uses Ethernet networking infrastructure and TCP/IP protocol
to transmit keyboard, video and mouse information between operators and connected
computers. Although 10BaseT Ethernet may be used, a dedicated, switched 100BaseT
network provides improved performance.
3.1 Getting Started
Before installing your ServSelect IP appliance, refer to the following list to ensure
you have all items that shipped with the appliance as well as other items necessary
for proper installation. The KV120/121A models ship with power input cords
appropriate for North America. The KV120/121E models ship with power input
cords appropriate for Europe.
Supplied with the ServSelect IP
The following items are supplied with the Servselect IP:
• ServSelect IP unit
• Power cord
• Rackmounting kit
• One straight-through null modem serial cable
• ServSelect IP Installer/User Guide
• ServSelect IP Software Installer/User Guide
• ServSelect IP software CD
• ServSelect IP and ServSelect IP Software Quick Installation Guide
To Next Page
Loading...
