SERVSELECT IP™ INSTALLER/USER GUIDE
44
5. Select a SAM to view and click the Version button. The SAM Version dialog
box appears. For more information on loading fi rmware, see Chapter 7.
Figure 4-21. SAM Version Dialog Box
6. Click X to close the SAM Version dialog box.
4.11 Scanning Your System
In scan mode, the appliance automatically scans from port to port (server to server).
You can scan up to 16 servers from a list of all servers attached to your server. You
can display the list by either the server’s name or EID number by pressing the
appropriate button.
NOTE:
Scanning is only available to the local analog user.
To add servers to the scan list:
1. Press
Print Screen. The Main dialog box will appear.
2. Click Setup - Scan. The Scan dialog box appears.
Figure 4-22. Scan Dialog Box
3. The Scan dialog box contains a listing of all the servers attached to your unit.
Click the checkbox next to the servers you wish to scan.
To Next Page
Loading...
