CHAPTER 4: ANALOG PORT OPERATION
39
To view current user connections:
1. If the OSD is not open, press
Print Screen. The Main dialog box will appear.
2. Click Commands - User Status. The User Status dialog box appears.
To disconnect a user:
1. Press
Print Screen. The Main dialog box will appear.
2. Select a username, click Disconnect and then click Yes in the message box to
disconnect the user.
-or-
Click Commands - User Status. The User Status dialog box appears.
Figure 4-14. User Status Dialog Box
3. Click the letter of a user to disconnect. The Disconnect dialog box will appear.
Figure 4-15. Disconnect Dialog Box
4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press
Escape to exit the dialog box without disconnecting a user.
To Next Page
Loading...
