Black Box SERVSWITCH Series - Serial SAM Configuration Options; Function Key Sequence Configuration

SERVSELECT IP™ INSTALLER/USER GUIDE
58
• ServSelect IP/CD Mode - This option allows you to control how the ServSelect
IP and CD lines operate. Available options are Always on and Toggle. When in
Toggle mode, ServSelect IP and CD lines are turned off for one-half second and
then turned on each time a module is selected or deselected. The default value
is Always on.
• Enter Sends - This option enables you to specify the keys that are transmitted
when
Enter is pressed. Available options are <CR> (Enter) or <CR><LF>
(Enter - Linefeed).
• Received - This option enables you to specify how the module translates a
received
Enter character. Available options are <CR> (Enter) or <CR><LF>
(
Enter-Linefeed).
• Background - This option changes the screen’s background color. The cur-
rently-selected color displays in the option line as it is changed. Available
values are
ØØ-3E. The default value is ØØ. This value cannot be identical to
the Normal Text or Bold Text value.
• Normal Text - This option changes the screen’s normal text color. The currently-
selected color displays in the option line as it is changed. Available values are
ØØ-3E. The default value is 2A. This value cannot be identical to the Bold Text
or Background value.
• Bold Text - This option changes the screen’s bold text color. The currently-
selected color displays in the option line as it is changed. Available values are
ØØ-3E. The default value is 3F. This value cannot be identical to the Normal
Text or Background value.
• Screen Size - This option allows you to specify the screen’s text width size.
Available values are widths of 80 columns or 32 columns. The length for both
widths is 26 lines.
The following options of the Configuration Screen enable you to define the function
keys that will perform a selected action. To specify a new function key, press and
hold the
Ctrl key, then press the function key that you want to associate with the
action. For example, if you want to change the Config Key Sequences option from
<Ctrl-F8> to <Ctrl-F7>, press and hold the
Ctrl key and then press F7.
• Confi g Key Sequences - This option allows you to defi ne the key combination
that causes the Confi guration Screen to appear.
• On-Line Key Sequence - This option allows you to defi ne the key sequence that
displays the On-Line mode. The default key sequence
is
Ctrl-F10.
• Help Key Sequence - This option allows you to defi ne the key combination that
displays the Help System screen. The default key sequence is
Ctrl-F1.