Server subject for certificate validation:
If necessary, type the server subject name that your device should use to verify that it is connecting to the correct Wi-Fi network.
Server SAN for certificate validation:
If necessary, type the server SAN that your device should use to verify that it is connecting to the correct Wi-Fi network.
IMSI:
If your SIM card has more than one IMSI, set the IMSI that you use to connect to the Wi-Fi network.
Wi-Fi profile IP and DNS options
Automatically obtain IP address and DNS:
Set whether your BlackBerry® device receives a routable IP address, a subnet mask, DNS settings, and a gateway address from the Wi-
Fi® network.
IP Address:
Type the IP address for your device.
Subnet mask:
Type the subnet mask for the wireless access point to which your device should connect.
Primary DNS:
Type the primary DNS to which your device should connect.
Secondary DNS:
Type the secondary DNS to which your device should connect.
Default gateway address:
Type the default gateway IP address to which your device should connect.
Domain suffix:
Type the domain that your device uses to resolve host names into IP addresses.
UMA connection settings
About connecting to a Wi-Fi network for UMA
Depending on your wireless service provider, you might be able to make calls, send and receive email, PIN, SMS text, and MMS messages, and
visit web pages using UMA. Your device must be connected to a Wi-Fi® network to use UMA. For more information, contact your wireless
service provider.
You can connect to a Wi-Fi network without saving the connection information, or you can save the connection information in a Wi-Fi profile.
User Guide
Wireless network coverage
224
To Next Page
Loading...
Need help?
General
Weight and Dimensions
