Battery Converter HDMI to SDI
66
Blackmagic Battery Converter HDMI to SDI
Convert HDMI outputs from devices such as HDV cameras and game consoles to SDI. This means you
can send video signals from HDMI over SDI using the longest SDI cables. You can even add SDI outputs
to computers with HDMI compatibility. Battery Converter HDMI to SDI includes a built in rechargeable
battery. Connectors are recessed and protected by an aircraft grade aluminum chassis.
Connectors
1. MINI-B USB PORT
Connects to the Converter Utility software via your Mac OS X or Windows computer. The Mini Converter’s
internal software is also updated using the USB port.
2. SDI OUT
SDI video output BNC connector.
3. SDI OUT
Secondary SDI output.
4. HDMI
HDMI type A video input.
5. ON BATT OFF
Switches battery power On or Off. When set to On, the Battery Converter will keep working even if
external power is lost. When set to Off, only external power is used to ensure built in battery power is
saved. The LED near the switch indicates the battery charge level by a continuous illumination for 100
percent charge, three flashes for 50 to 90 percent charge, two flashes for 10 to 50 percent charge and a
single flash if less than 10 percent charge is remaining.
6. POWER +12V
12 volt power supply input.
Battery Converter HDMI to SDI
1
2
3
4
5
6
HDMI to SDI
Battery Converter
HDMI
USB
SDI OUT
ON
OFF
POWER
+12V to 31V DC
BATT
SDI OUT
HDMI LOCK
1
10
0 9050
100
2
3
To Next Page
Loading...
